Entrance automation. Open, close, stop.
Gate and shutter motors built to the automation OEM's specification.
Background: representative footage
The duty
Reliable cycles, day after day.
A gate motor opens and closes an electric gate, door or shutter. It is controlled by a switch wired to a sensor or a remote control, and does three things: open, close and stop.
EMPD supplies complete entrance-automation motors to each OEM's specification.
Applications
What the duty demands
- Reliable holding brake
- Single-phase supply in buildings
- Short duty, many cycles
Specifications
The range, at a glance.
Typical range for entrance automation. Every motor is built to your specification; tell us the duty and we confirm the design.
3~ · IEC 60034
| FRAME SIZE | IEC 63 TO 100 |
| OUTPUT | 0.18 TO 3 kW |
| POLES | 2, 4, 6 AND 8 |
| MOUNTING | B5, B14 OR SPECIAL |
| CONSTRUCTION | FULL ALUMINIUM |
Recommended products
Motors for entrance automation.
Brake motorsSpring-applied DC or AC brakes from 0.8 to 160 Nm, sized at 100–250 % of motor torque.
EBM-D80-4-0.75 · 0.75 kW→
Single phaseCapacitor-start (CSIR), capacitor-start capacitor-run (CSCR) and permanent split capacitor (PSC) motors for 50 and 60 Hz supplies.
EM1R-90L-4-1.5 · 1.5 kW→Example ratings
| Model | kW | Poles | rpm | Efficiency | Brake |
|---|---|---|---|---|---|
| EM1R-90L-4-1.5 | 1.5 | 4 | 1430 | 80 % | – |
| EBM-D80-4-0.75 | 0.75 | 4 | 1440 | 79.6 % | DC |
Proof
Evidence, not adjectives.
Built to your specification
Tell us the duty
Send the duty, supply and mounting. Our engineers reply with a recommendation and a quotation.
Application study
A single-phase compressor that has to start under pressure
Read the worked example →
Test reports
Every motor routine tested
See real routine and type test reports from our lab →