13 motor families
Standard IE2 / IE30.07–55 kW
Brake motors0.07–15 kW
Single phase0.18–2.2 kW
Inverter duty0.18–15 kW
Geared motors0.18–15 kW
Dual speed0.18–15 kW
Hollow shaft0.18–15 kW
Double flange / shaft0.18–15 kW
Cooling tower0.15–18.5 kW
Aerator motors0.75–2.2 kW
Power loom0.25–3.7 kW
Vibrator motors1.1–7.3 kW
BLDC / PMSM0.15–45 kW248 ratings with full data, 50 and 60 Hz, metric and imperial.
S.F. No. 450/3A, Annai Nagar, Othakalmandapam Road, Chettipalayam, Coimbatore 641 201, Tamil Nadu, India
Standard ranges with full catalogue data, and application motors engineered to your drawing, all from the same plant, test lab and quality gates.
Standard IE2 / IE3Brake motorsSingle phaseInverter dutyGeared motorsDual speedHollow shaftDouble flange / shaftCooling towerAerator motorsPower loomVibrator motorsBLDC / PMSMStandard IE2 / IE3Brake motorsSingle phaseInverter dutyGeared motorsDual speedHollow shaftDouble flange / shaftCooling towerAerator motorsPower loomVibrator motorsBLDC / PMSMRange at a glance
Each bar spans the family's output range on a log scale. Red families have full ratings in the motor finder; tap any bar to jump to it.
Find by frame
Each ring is an IEC frame, from 63 at the centre to 250 at the edge. Pick the frame of the motor you are replacing and see every EMPD family built in it.
Frame 132S / M · shaft height 132 mm
Families marked "any frame" are built to your drawing, in the frame your machine needs.
Full catalogue data · 50 & 60 Hz
Premium (IE3) and high (IE2) efficiency squirrel-cage motors in aluminium and cast iron. BIS licensed to IS 12615:2026, CE marked, 60 Hz / 460 V versions with SF 1.25.
Full catalogue data · 50 & 60 Hz
Spring-applied DC or AC brakes from 0.8 to 160 Nm, sized at 100–250 % of motor torque. S4 hoist duty, manual release and monitoring options.
Full catalogue data · 50 & 60 Hz
Capacitor-start (CSIR), capacitor-start capacitor-run (CSCR) and permanent split capacitor (PSC) motors for 50 and 60 Hz supplies.
Engineered to your drawing
Motors for variable-frequency drives with separate forced cooling for full torque at low speed.
Engineered to your drawing
Motor and gearbox as one unit, worm or helical, in cast iron or aluminium.
Engineered to your drawing
Pole-changing motors for a fast and a creep speed from one frame.
Engineered to your drawing
Through-bore shafts for direct mounting on driven shafts.
Engineered to your drawing
Twin flanges or shaft extensions for actuators and drives.
Engineered to your drawing
Long-shaft, weather-protected motors for cooling-tower and chiller fans.
Engineered to your drawing
Flange-mounted cast-iron motors for biological wastewater aerators.
Engineered to your drawing
Rugged foot-mounted motors for continuous weaving duty.
Engineered to your drawing
Unbalanced-mass vibrator motors for screens and feeders.
Engineered to your drawing
Permanent-magnet brushless motors to customer drawing; CE attested 1.5–4.5 kW, 36–72 V DC.
Standard specification
Every family starts from the same specification. Options are listed alongside.
Send us output, speed, supply, mounting, duty and quantity. Our engineers reply with a recommendation and a quotation.