IEC 90S · 230/400 V
Representative model from frame 90S dimensions
Tap a partDrag to rotate · scroll to zoom
0.37kWRated output · 50 Hz
700rpmRated speed
62%Efficiency, full load
5.1NmRated torque
1.63ACurrent at 400 V
0.53Power factor
13kgWeight, B3
2.3× MNStarting torque
Performance · 50 Hz, tested values
| Output | 0.37 kW |
|---|---|
| Poles · synchronous speed | 8 · 750 rpm |
| Rated speed | 700 rpm |
| Rated torque MN | 5.1 Nm |
| Current at 230 V | 1.71 A |
| Current at 400 V | 1.63 A |
| Current at 690 V | 1.63 A |
| Current at SF 1.15, 400 V | 1.7 A |
| Efficiency 100 / 75 / 50 % | 62 / 59 / 51 |
| Power factor 100 / 75 / 50 % | 0.53 / 0.44 / 0.34 |
| Efficiency class | – (IEC 60034-30-1) |
| Locked-rotor torque MA/MN | 2.3 |
|---|---|
| Starting current IA/IN | 3 |
| Breakdown torque MK/MN | 2.5 |
| Pull-up torque MS/MN | 2.1 |
| Rotor inertia J | 0.0028 kgm² |
| Sound pressure LPA at 1 m | 50 dB(A) |
| Insulation | Class F, temperature rise class B |
| Enclosure · cooling | IP55 · IC411 TEFC |
| Ambient | −20 °C to +40 °C |
| Service factor | 1.15 at 400 V 50 Hz (S1) |
| Bearings DE / NDE | 6205ZZ / 6203ZZ |
Torque–speed curve indicative
Drawn through the catalogue points MA, MS, MK and MN. Request the tested curve for your application.
Part-load performance
Efficiency determined to IEC 60034-2-1. Values on a 400 V winding (230 V for single-phase), subject to IEC tolerances.
Dimensions · IM B3, frame 90S
Schematic outline for orientation, not to scale for manufacture. Request the certified drawing (PDF / DXF / STEP) with your enquiry.
| AFoot hole spacing, end | 140 mm |
|---|---|
| BFoot hole spacing, side | 100 mm |
| CShaft shoulder to foot hole | 56 mm |
| HShaft centre height | 90 mm |
| KFoot hole diameter | 10 mm |
| LOverall length | 349 mm |
| ACBody diameter | 178 mm |
| HDOverall height | 225 mm |
| DShaft diameter | 24 mm |
| EShaft length | 50 mm |
| MFlange B5 · pitch circle | 165 mm |
| NFlange B5 · spigot | 130 mm |
| PFlange B5 · outside diameter | 200 mm |
| SFlange B5 · hole diameter | 12 mm |
Mountings B3, B5, B14, B35 and B34 on every rating. Shaft tolerance to IEC 60072. NEMA frames 56C to 256T built to MG 1 on request.
Documents & next steps
PDF
RFQ
DWG
Datasheet
EMPD-DS-IE-01 · Rev 2.1
Request a quote
Model EM2-90S-8-0.37 filled in for you
Certified drawing
PDF, DXF or STEP on request
Related motors
EM2-71-2-0.37IE2 · 3-phase · 0.37 kW · 2P · 2815 rpmEM2-71-4-0.37IE2 · 3-phase · 0.37 kW · 4P · 1410 rpmEM2-80-6-0.37IE2 · 3-phase · 0.37 kW · 6P · 920 rpmEM2-80-8-0.25IE2 · 3-phase · 0.25 kW · 8P · 695 rpmEM2-90L-8-0.55IE2 · 3-phase · 0.55 kW · 8P · 680 rpmEBM-D90S-8-0.37Brake motor · 0.37 kW · 8P · 700 rpmEBM-A90S-8-0.37Brake motor · 0.37 kW · 8P · 700 rpm