IEC 100L · 230/400 V
Representative model from frame 100L dimensions
Tap a partDrag to rotate · scroll to zoom
1.1kWRated output · 50 Hz
690rpmRated speed
71.5%Efficiency, full load
15.2NmRated torque
3.7ACurrent at 400 V
0.6Power factor
24.5kgWeight, B3
1.8× MNStarting torque
Performance · 50 Hz, tested values
| Output | 1.1 kW |
|---|---|
| Poles · synchronous speed | 8 · 750 rpm |
| Rated speed | 690 rpm |
| Rated torque MN | 15.2 Nm |
| Current at 230 V | 3.9 A |
| Current at 400 V | 3.7 A |
| Current at 690 V | 3.7 A |
| Current at SF 1.15, 400 V | 3.9 A |
| Efficiency 100 / 75 / 50 % | 71.5 / 70.5 / 68 |
| Power factor 100 / 75 / 50 % | 0.6 / 0.51 / 0.39 |
| Efficiency class | – (IEC 60034-30-1) |
| Locked-rotor torque MA/MN | 1.8 |
|---|---|
| Starting current IA/IN | 3.2 |
| Breakdown torque MK/MN | 2.1 |
| Pull-up torque MS/MN | 1.7 |
| Rotor inertia J | 0.0095 kgm² |
| Sound pressure LPA at 1 m | 53 dB(A) |
| Insulation | Class F, temperature rise class B |
| Enclosure · cooling | IP55 · IC411 TEFC |
| Ambient | −20 °C to +40 °C |
| Service factor | 1.15 at 400 V 50 Hz (S1) |
| Bearings DE / NDE | 6206ZZ / 6205ZZ |
Torque–speed curve indicative
Drawn through the catalogue points MA, MS, MK and MN. Request the tested curve for your application.
Part-load performance
Efficiency determined to IEC 60034-2-1. Values on a 400 V winding (230 V for single-phase), subject to IEC tolerances.
Dimensions · IM B3, frame 100L
Schematic outline for orientation, not to scale for manufacture. Request the certified drawing (PDF / DXF / STEP) with your enquiry.
| AFoot hole spacing, end | 160 mm |
|---|---|
| BFoot hole spacing, side | 140 mm |
| CShaft shoulder to foot hole | 63 mm |
| HShaft centre height | 100 mm |
| KFoot hole diameter | 12 mm |
| LOverall length | 368 mm |
| ACBody diameter | 199 mm |
| HDOverall height | 254 mm |
| DShaft diameter | 28 mm |
| EShaft length | 60 mm |
| MFlange B5 · pitch circle | 215 mm |
| NFlange B5 · spigot | 180 mm |
| PFlange B5 · outside diameter | 250 mm |
| SFlange B5 · hole diameter | 14.5 mm |
Mountings B3, B5, B14, B35 and B34 on every rating. Shaft tolerance to IEC 60072. NEMA frames 56C to 256T built to MG 1 on request.
Documents & next steps
PDF
RFQ
DWG
Datasheet
EMPD-DS-IE-01 · Rev 2.1
Request a quote
Model EM2-100L-8-1.1 filled in for you
Certified drawing
PDF, DXF or STEP on request
Related motors
EM2-80-2-1.1IE2 · 3-phase · 1.1 kW · 2P · 2880 rpmEM2-90S-4-1.1IE2 · 3-phase · 1.1 kW · 4P · 1425 rpmEM2-90L-6-1.1IE2 · 3-phase · 1.1 kW · 6P · 925 rpmEM2-100L-8-0.75IE2 · 3-phase · 0.75 kW · 8P · 690 rpmEM2-112M-8-1.5IE2 · 3-phase · 1.5 kW · 8P · 690 rpmEBM-D100L-8-1.1Brake motor · 1.1 kW · 8P · 690 rpmEBM-A100L-8-1.1Brake motor · 1.1 kW · 8P · 690 rpm