Wind energy. Built for the nacelle.
Yaw, hydraulic and cooling motors with C4H anti-corrosion paint for decades at height.
Background: representative footage
The duty
Reliable at height, in all weather.
A wind turbine turns the wind into rotation through its blades, and a generator turns that into electricity. Around the generator, several smaller electric motors keep the turbine working: turning it into the wind, driving its hydraulics and cooling it.
EMPD supplies these motors for wind applications.
Applications
What the duty demands
- Corrosion protection (C4H paint) and IP66
- Brakes and anti-condensation heaters
- 690 V windings and decades of service
Specifications
The range, at a glance.
Typical range for wind energy. Every motor is built to your specification; tell us the duty and we confirm the design.
3~ · IEC 60034
| FRAME SIZE | IEC 90 TO 160L |
| OUTPUT | UP TO 15 kW |
| POLES | 2, 4, 6 AND 8 |
| MOUNTING | B3, B5, B14 AND COMBINATIONS, OR SPECIAL MOUNTING |
| SUPPLY | 690 V OR 400 V ±10 %, 50 Hz ±5 %, OR AS REQUIRED |
| CONSTRUCTION | FULL ALUMINIUM, ALUMINIUM BODY WITH CAST-IRON ENCLOSURE, OR FULL CAST IRON |
| PAINT | C4H ANTI-CORROSION COATING FOR HIGH CORROSION STRESS |
Recommended products
Motors for wind energy.
Brake motorsSpring-applied DC or AC brakes from 0.8 to 160 Nm, sized at 100–250 % of motor torque.
EBM-D112M-4-4 · 4 kW→
Dual speedPole-changing motors for a fast and a creep speed from one frame.
63–160L · 0.18–15 kW→
Inverter dutyMotors for variable-frequency drives with separate forced cooling for full torque at low speed.
63–160L · 0.18–15 kW→Example ratings
| Model | kW | Poles | rpm | Efficiency | Brake |
|---|---|---|---|---|---|
| EBM-D112M-4-4 | 4 | 4 | 1440 | 86.6 % | DC |
| EBM-D100L-4-3 | 3 | 4 | 1445 | 85.5 % | DC |
Proof
Evidence, not adjectives.
Customers



EMPD supplies motors for wind energy to Siemens Gamesa, Vayona Energy and ReNew Power.
Application study
High and hot: derating for altitude and ambient
Read the worked example →
Test reports
Every motor routine tested
See real routine and type test reports from our lab →
FAQ
Questions, answered.
What motors does EMPD make for wind energy?
The typical range is output up to 15 kW; frame sizes IEC 90 to 160L; 2, 4, 6 and 8 poles. Construction: full aluminium, aluminium body with cast-iron enclosure, or full cast iron. EMPD builds each motor to the OEM's specification for the duty, supply and mounting.
Where are EMPD motors used in wind energy?
Yaw drive motors, hydraulic pump motors, dual-speed oil-cooler motors and nacelle fan motors.
What does a motor for wind energy need?
Corrosion protection (C4H paint) and IP66. Brakes and anti-condensation heaters. 690 V windings and decades of service. EMPD designs, builds and routine tests every motor in its own plant in Coimbatore, India.
Can EMPD supply motors for 60 Hz markets and with CE marking?
Yes. Every catalogue rating has 460 V 60 Hz data in the online motor finder, and three-phase IE2 / IE3 motors for 60 Hz carry a service factor of 1.25. NEMA frames 56C to 256T are built to MG 1 on request. For Europe and the UK, EMPD holds a CE attestation of conformity from DEKRA covering single-phase motors from 0.18 to 3.7 kW, three-phase motors from 0.18 to 15 kW, and BLDC and PMSM motors.
How do I get a quote?
Send the output, speed, supply, mounting, duty and quantity through the quote form on empdrives.com, by email to [email protected], or on WhatsApp. EMPD's engineers reply with a recommendation and a quotation.









