Hoists & cranes. Built for the lift.
Duty-rated brake and dual-speed motors with high starting torque for frequent starts and reversals.
Background: representative footage
The duty
Frequent starts, safe stops.
Hoist motors are duty-rated motors with high starting torque and low starting current, made for frequent starts, stops and reversals. A high pull-out torque to rotor inertia ratio gives rapid acceleration.
EMPD hoist-duty motors are energy-efficient and suited to heavy-duty use in cranes, lifts, weirs, sluices and auxiliary drives.
Applications
What the duty demands
- High starting torque, low starting current
- Frequent starts: S4 duty, thermistors
- Brake at about 200 % with a thermal check
Specifications
The range, at a glance.
Typical range for hoists & cranes. Every motor is built to your specification; tell us the duty and we confirm the design.
3~ · IEC 60034
| FRAME SIZE | IEC 63 TO 250M |
| OUTPUT | 0.15 TO 15 kW |
| POLES | 2, 4, 6 AND 8, OR DUAL SPEED |
| MOUNTING | B3, B5, B14 AND COMBINATIONS |
| SUPPLY | 415 V ±10 %, 50 Hz ±5 %, OR AS REQUIRED; VVVF DRIVES |
| PROTECTION | IP55, HIGHER ON REQUEST |
| ENCLOSURE | TEFC |
| INSULATION | CLASS F OR H, WITH TEMPERATURE RISE LIMITED TO CLASS B OR F |
| CONSTRUCTION | FULL ALUMINIUM, ALUMINIUM BODY WITH CAST-IRON ENCLOSURE, OR FULL CAST IRON |
| BRAKE | DC OR AC, 0.8 TO 160 Nm, SIZED AT ABOUT 200 % OF MOTOR TORQUE |
Recommended products
Motors for hoists & cranes.
Brake motorsSpring-applied DC or AC brakes from 0.8 to 160 Nm, sized at 100–250 % of motor torque.
EBM-D112M-4-4 · 4 kW→
Geared motorsMotor and gearbox as one unit, worm or helical, in cast iron or aluminium.
63–160L · 0.18–15 kW→
Dual speedPole-changing motors for a fast and a creep speed from one frame.
63–160L · 0.18–15 kW→Example ratings
| Model | kW | Poles | rpm | Efficiency | Brake |
|---|---|---|---|---|---|
| EBM-D112M-4-4 | 4 | 4 | 1440 | 86.6 % | DC |
| EBM-D100L-4-2.2 | 2.2 | 4 | 1435 | 84.3 % | DC |
Proof
Evidence, not adjectives.
Customers

EMPD supplies motors for hoists & cranes to Bajaj Indef.
Application study
A 5-tonne hoist: sizing the motor, the brake and its heat
Read the worked example →
Test reports
Every motor routine tested
See real routine and type test reports from our lab →
FAQ
Questions, answered.
What motors does EMPD make for hoists & cranes?
The typical range is output 0.15 to 15 kW; frame sizes IEC 63 to 250M; 2, 4, 6 and 8 poles or dual speed. Construction: full aluminium, aluminium body with cast-iron enclosure, or full cast iron. EMPD builds each motor to the OEM's specification for the duty, supply and mounting.
Where are EMPD motors used in hoists & cranes?
Chain hoists, rope hoists, trolleys and cranes, weirs and sluices.
What does a motor for hoists & cranes need?
High starting torque, low starting current. Frequent starts: S4 duty, thermistors. Brake at about 200 % with a thermal check. EMPD designs, builds and routine tests every motor in its own plant in Coimbatore, India.
Can EMPD supply motors for 60 Hz markets and with CE marking?
Yes. Every catalogue rating has 460 V 60 Hz data in the online motor finder, and three-phase IE2 / IE3 motors for 60 Hz carry a service factor of 1.25. NEMA frames 56C to 256T are built to MG 1 on request. For Europe and the UK, EMPD holds a CE attestation of conformity from DEKRA covering single-phase motors from 0.18 to 3.7 kW, three-phase motors from 0.18 to 15 kW, and BLDC and PMSM motors.
How do I get a quote?
Send the output, speed, supply, mounting, duty and quantity through the quote form on empdrives.com, by email to [email protected], or on WhatsApp. EMPD's engineers reply with a recommendation and a quotation.









