Entrance automation. Open, close, stop.
Gate and shutter motors built to the automation OEM's specification.
Background: representative footage
The duty
Reliable cycles, day after day.
A gate motor opens and closes an electric gate, door or shutter. It is controlled by a switch wired to a sensor or a remote control, and does three things: open, close and stop.
EMPD supplies complete entrance-automation motors to each OEM's specification.
Applications
What the duty demands
- Reliable holding brake
- Single-phase supply in buildings
- Short duty, many cycles
Specifications
The range, at a glance.
Typical range for entrance automation. Every motor is built to your specification; tell us the duty and we confirm the design.
3~ · IEC 60034
| FRAME SIZE | IEC 63 TO 100 |
| OUTPUT | 0.18 TO 3 kW |
| POLES | 2, 4, 6 AND 8 |
| MOUNTING | B5, B14 OR SPECIAL |
| CONSTRUCTION | FULL ALUMINIUM |
Recommended products
Motors for entrance automation.
Brake motorsSpring-applied DC or AC brakes from 0.8 to 160 Nm, sized at 100–250 % of motor torque.
EBM-D80-4-0.75 · 0.75 kW→
Single phaseCapacitor-start (CSIR), capacitor-start capacitor-run (CSCR) and permanent split capacitor (PSC) motors for 50 and 60 Hz supplies.
EM1R-90L-4-1.5 · 1.5 kW→Example ratings
| Model | kW | Poles | rpm | Efficiency | Brake |
|---|---|---|---|---|---|
| EM1R-90L-4-1.5 | 1.5 | 4 | 1430 | 80 % | – |
| EBM-D80-4-0.75 | 0.75 | 4 | 1440 | 79.6 % | DC |
Proof
Evidence, not adjectives.
Built to your specification
Tell us the duty
Send the duty, supply and mounting. Our engineers reply with a recommendation and a quotation.
Application study
A single-phase compressor that has to start under pressure
Read the worked example →
Test reports
Every motor routine tested
See real routine and type test reports from our lab →
FAQ
Questions, answered.
What motors does EMPD make for entrance automation?
The typical range is output 0.18 to 3 kW; frame sizes IEC 63 to 100; 2, 4, 6 and 8 poles. Construction: full aluminium. EMPD builds each motor to the OEM's specification for the duty, supply and mounting.
Where are EMPD motors used in entrance automation?
Automatic gates and doors, automatic toll gates and automatic shutters.
What does a motor for entrance automation need?
Reliable holding brake. Single-phase supply in buildings. Short duty, many cycles. EMPD designs, builds and routine tests every motor in its own plant in Coimbatore, India.
Can EMPD supply motors for 60 Hz markets and with CE marking?
Yes. Every catalogue rating has 460 V 60 Hz data in the online motor finder, and three-phase IE2 / IE3 motors for 60 Hz carry a service factor of 1.25. NEMA frames 56C to 256T are built to MG 1 on request. For Europe and the UK, EMPD holds a CE attestation of conformity from DEKRA covering single-phase motors from 0.18 to 3.7 kW, three-phase motors from 0.18 to 15 kW, and BLDC and PMSM motors.
How do I get a quote?
Send the output, speed, supply, mounting, duty and quantity through the quote form on empdrives.com, by email to [email protected], or on WhatsApp. EMPD's engineers reply with a recommendation and a quotation.










